Straight to the point.
Shower door not sliding properly.
You may think that this is a repair job you will be able to do on your own.
Shower door problems are common with bypass shower doors.
Turning this screw raises or lowers the roller.
It once again usually occurs because of water buildup or debris.
On shower doors typically the rollers will be on a hanger bracket that has a few holes in it or a long angled slot.
Just remove a single screw to access and remove the small plastic guide.
The problem is usually because the shower door needs realignment and the clamps need to be adjusted.
After a bit of adjustment the door should roll easily without rubbing on the bottom track.
The trick is to find where and how to make that adjustment.
If left undried you can end up with mold and water issues.
Look at the rollers from inside of the shower.
Protect the shower or tub from scratches with a drop cloth.
This is a simple repair to a common problem.
Many times the door rollers will come off the upper track.
Give the screw a clockwise turn and test to see whether the door slides easier.
Most doors have a small plastic guide in the middle of the lower track.
Depending on where you position the roller in these holes or slot will adjust the height of the door.
A bypass door or a sliding shower door that runs on a track provides the perfect environment for water to gather and cause problems.
Unless it s properly planned and designed a doorless shower can end up spraying water outside of the shower area which means towelling it up after every shower.
The metal track where the rollers sit can rust gather debris develop mold and mildew problems and generally deteriorate from water damage.
A dragging shower door.
If the rollers are off track lift the ends of the shower door and reseat the rollers.
This is a common problem with sliding shower doors.
Unscrew the guide at the lower edge of the sliding door.
A door that drags on the lower track will eventually do permanent damage to both the door and the track.